For use of this form, see AR ; the proponent agency is DCSLOG. 1. ISSUE. ITEM. 2. TURN-IN. 5. PAGE. 6. FOR LOCAL USE. DA FORM , JUL. Download Fillable PDF Format Click Below ▽ Download XFDL IBM Lotus Forms Viewer/Pure Edge Format Click Below. REQUEST FOR ISSUE AND TURN-IN OF AMMUNITION CONTINUATION SHEET DOCIC NSN DA FORM , JUL NOMENCLATURE 4 .
Need an outside opinion and don’t know where to turn? Shipments out of the theater to support other contingencies may also be made when directed. Prepared by using unit for turn-in of munitions and munitions-related items.
Army Publishing Directorate
Attention to the following guidelines makes the receipt of ammunition safer and easier to control: Inspections are conducted at ra designated inspection area.
Directs the relocation of specific items to specific storage locations. Also, inspectors must check the transports for evidence of tampering or sabotage.
Ensure that appropriate placards and labels are properly affixed to vehicles before loading. Also, the potential exists for operations to be concluded without expenditure of munitions. Depending on the type of operation, some munitions may not be authorized for issue, even if they are available at the storage facility. The term, issuerefers to the transfer of ammunition stocks from a munitions storage facility to an authorized user, but not to another storage facility.
Use information from multiple sources when making important professional decisions. Simply fill out this form, and we’ll get back to 518-1 as soon as we can. Prepared by the requesting unit and presented to the storage facility for issue. Munitions shipments into and out of USAF facilities require careful coordination to prevent disruption of service. If the deficiencies cannot be corrected, the driver or convoy commander will coordinate with his unit to ensure that serviceable transports are provided.
While ammunition supply units may be required to provide technical assistance, MTMC and transportation units are responsible for loading and off-loading waterborne vessels in the theater of operations.
In a division, the DAO or designated representative authenticates the DA Form or facsimile-formatted document before the requesting unit arrives at the storage facility.
This way, the MCT can supply advance information on the mode of transportation, the time of arrival, and the positioning spotting of carriers. An ” R” following the form number indicates that the unit may reproduce the form.
The supporting MMC is a good source of information. Verify availability of ammunition for shipment against on-hand ofrm. Military ammunition inspectors, QASAS, or other qualified personnel will inspect vehicles as discussed in the Receipts section d this chapter.
It can also be used for writing SOPs for ammunition receipts. Normally, theater, corps, or HN transportation assets are used for transportation. Prepared by storage facility as a temporary receipt or storage document. Do you have a question about Army regulation? The supply facility begins planning the mechanics of the specific shipment upon receipt of an MRO, shipping instructions, or other shipment authority.
Munitions managers at the unit, brigade, division, corps, and MMC levels must be consistent firm the guidance they provide. All responsible parties will verify the issue. It may be necessary to rewarehouse or consolidate some stocks already in storage to make room for additional stocks and to facilitate vehicle off-loading at the planned storage location.
Prepared by storage facility for each lot and stack of munitions turned in. See DA Pam for motor vehicle shipment regulations, precautions and safe handling procedures, inspection criteria, and technical escort procedures. Used to record storage locations of all items in the shipment. Steering for safe operation. Tires for any dangerous condition. Brakes and lights especially for night operations for proper operation.
The forms listed below are used for processing turn-ins. Are you looking for an unbiased outside opinion? The thoroughness of advance planning largely determines the efficiency of any shipping operation.
Directs relocation of specific items to specific storage locations.
DA Form , Request for Issue and Turn-In of Ammunition (Continuation Sheet) –
Can any Leader inspect a Profile? Ensure security of munitions throughout entire operation. Salvage materiel is stored in the inert salvage area. You Might Also Like…. Determine personnel necessary to complete the mission.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.